top of page
Search

Vaillant F75 Fault Code – Causes & Fixes in Glasgow & Surrounding Areas

  • duncan-1stclassgas
  • Mar 22
  • 2 min read

Vaillant F75 Fault Code – Causes & Fixes in Glasgow & Surrounding Areas


If your Vaillant boiler is displaying the F75 fault code, it means the system isn’t detecting water pressure changes when the pump starts. This is a common issue in areas like Bearsden, Milngavie, Clydebank, Knightswood, Anniesland, Scotstoun, and Yoker, but it can be fixed quickly with the right approach.



---


What Causes the F75 Error?


1. Faulty Pump – If the pump is weak or failing, it won’t create enough pressure for the boiler to register.



2. Blocked or Dirty Pressure Sensor – Over time, sludge and debris in Glasgow’s older heating systems can clog the pressure sensor, stopping it from working properly.



3. Low System Pressure – If there’s not enough water in the system, the pressure won’t rise when the pump starts.



4. Airlocks or Blockages – Trapped air or sludge in the pipes (common in older homes around Partick, Scotstoun, and Drumchapel) can prevent water from circulating correctly.





---


How to Fix the F75 Fault Code


1. Check & Repressurize the System


Look at the boiler pressure gauge. If it’s below 1.0 bar, it needs topping up.


Use the filling loop to add water until the pressure reaches 1.2 - 1.5 bar.


Reset the boiler and see if the error clears.



2. Clean or Replace the Pressure Sensor


A Gas Safe engineer can remove and clean the pressure sensor or replace it if necessary.



3. Check the Pump


If the pump is faulty, a new one may be needed (commonly a Grundfos or Wilo replacement).



4. Power Flush the System


If sludge is causing blockages (especially in areas with older heating systems like Yoker and Clydebank), a power flush can clear the system and prevent future issues.




---


Need an F75 Fault Fixed in Glasgow?


If repressurizing doesn’t work or the problem keeps coming back, it’s best to call a Gas Safe registered engineer. We provide expert boiler repairs across Glasgow, Bearsden, Milngavie, Clydebank, Anniesland, Knightswood, Scotstoun, and Yoker.


📞 Call us now on 07968 047 977 for fast, local boiler repairs!



 
 
 

Recent Posts

See All
Boiler Repair in Clydebank

We know what its like to find decent, reliable, honest trades people. We have had to deal with them too, its frustrating! 1st Class Gas, based in Drumchapel, offer FIXED PRICE LABOUR COST & NO CALL O

 
 
 

Comments


© 2035 by Ground Floor. Powered and secured by Wix

bottom of page